null

Cleaning Instructions

   

Pro Tip

Pro Tip

It's important to clean your Naväge Nose Cleaner after each use. If you rinse it, separate the parts, and use the Countertop Caddy to allow it to dry, you'll find it's very easy to keep your Naväge Nose Cleaner clean and fresh.

 


 

Nose Cleaner Cleaning AreasUpper and Lower Tanks, Nose Pillows, and Nasal Dock: Detach and hand-wash after use with anti-bacterial dishwashing soap or diluted white vinegar (half-water, half-vinegar). 


Deep cleaning: For a deeper cleaning, follow the instructions above using an anti-bacterial spray such as Lysol All-Purpose Cleaner or Clorox Clean-Up. Let sit for at least 5 minutes before rinsing thoroughly to remove all residue.

Wipe the underside of the white Mechanical Module with a cloth dampened with anti-bacterial soap. The Mechanical Module is not waterproof. Do not rinse the underside with running water, as this may force water into the battery compartment and cause corrosion. Don’t immerse the Mechanical Module. It is not water proof.
 
Drain pipe: Put antibacterial dishsoap or diluted white vinegar on the included cleaning swab, and insert it as shown in Fig. 10 and Fig.11. To rinse, lift the Drain Pull and run hot water through the drain pipe (see Fig. 9).

Crushing Chamber Lid: See Fig. 9 and rinse areas A and B with hot water for 30 seconds to melt any salt crystals.

The best way to air dry your nose cleaner and keep everything clean and organized is to use the Naväge Countertop Caddy.

The Naväge Nose Cleaner is not dishwasher safe. Exposing the tanks to dishwasher heat may warp them and prevent them from sealing to the mechanical module. Running the Nose Cleaner through a dishwasher voids the warranty.

 

Need more Cleaning Swabs? Click here.